The EQ2082 is typically equipped with a manual winch. First, lift the handle and pull it to the left, then remove the red hook. Turn on the power, fully depress the clutch pedal, ensure the gear is in neutral, then start the vehicle. Push the handle forward and slowly release the clutch pedal; the winch will begin to extend. Fully depress the clutch pedal, pull the handle back, then slowly release the clutch pedal; the winch will begin to retract. It is important to note that during winch operation, the steel wire rope should remain as straight as possible to prevent knotting. When the clutch is fully depressed and the handle is in the middle position, the winch will not move. Return the hook to its original position, and after reattaching the hook, simply tighten the steel wire rope slightly. After completing all operations, return the handle to the middle position, place the handle back in its original position, and then turn off the power.